ACS Exhaust System for 630i ??

tenizbal

New Member
I'm a 630i driver - made a trip down to PML a couple months ago ...
saw a 645 with full ACS kit ... absolutely wicked !!!

After minutes of admiration, I went into the service center.
Spoke to one of the staff due to some engine oil topping up issues ...
Went on to further enquire about the ACS exhaust system which I was extremely attracted to :yummie:

A couple of points taken :
1. Need to widen the openings of the back bumper
2. Attach additional bumper kit ... to complete the exhaust package only.

Just made another trip down today .. was directed to the Parts & Accessories counter this time.
Was almost pulling out my wallet BUT the staff at the counter says " ACS exhaust system" only applicable to 645 ?? !! :furious:

I'm abit confused here ...

My question is what has the exhaust system got to do with the engine size ??

I appreciate any experts here can educate and advice me on this..............:helpp!:
 
Re: ACS Exhaust System for 630i ??

there should be exhaust for the 630i i think... as for the difference in exhaust..i think it has for different cylinder... like 520,523,530 use same exhaust but 545 uses different one..
 
Re: ACS Exhaust System for 630i ??

try to get other exhaust, badder n louder.
Jinna 007 should noe all dis.
 
Re: ACS Exhaust System for 630i ??

i guess the 645 has a v8 while the 630, an inline 6. two different engine configurations and hence different plumping for the exhausts as well.
 
Re: ACS Exhaust System for 630i ??

does the 630i have another aftermarket exhaust system besides ACS?
 
Re: ACS Exhaust System for 630i ??

Hi all,

First of all, thank you all for your precious time ... and of course useful information.

Different plumbing design i guess is quite likely as mentioned by xxterxx & louis ...
And yes i have searched around for different and less but not least more recognised brands, i.e. Breyton, Hartge, Hamann, etc ...

Apparently these tuners have their own versions of exhaust systems but as what you have all mentioned they didn't indicate whether it can be installed into a 630.

Sad to say the stock exhaust system is doesn't comes with the "roar and macho" noises ... that's why I'm seriously doing my homework to groom up my baby ...

What about "horses"?
The ACS exhaust system claims at least 5 horses increment ... :whattheh:

I appreciate if anyone who can contribute more ideas and of course if you already have a tuned up 630, I appreciate (x100) if you can throw me some pictures or tips ...

Again, thank you all for contributing ! :)
 
Re: ACS Exhaust System for 630i ??

haha.. u are not easily satisfied, but i think it should be able to get much louder.

what colour is yours in btw?
 
Re: ACS Exhaust System for 630i ??

hee hee ... not really ...

mine's the non-metallic black version ... looks is pretty fine to me ...
but all i can say is maintenance of the body is making me haywire ...
even tiny specs of dusts can be easily seen all the time ...
was actually eyeing on the stratus grey ... sadly they had no more stock at that time of my purchase.

wow .. i see in your picture yours is the grey version?
the perfect color for singapore road weather and conditions.

so what have you done so far? :yummie:
 
Re: ACS Exhaust System for 630i ??

yup, stratus grey. i can't do anything to it though, it's my dad's car. haha
 
Re: ACS Exhaust System for 630i ??

The 630i has the new R6 engines, just like E60 and E90s

As this series of engines are very new, the aftermarket guys are still developing them.

There are also very few mods at the moment for these engines.

The 645i uses an older 4.4l engine that's been around for a while in the 545i, 745i etc.
 
Re: ACS Exhaust System for 630i ??

Good Day to All,

A bit of updates ... pardon me if you have already heard of this.
Hamann finally has came out with an exhaust system for 630 models (coupes and/or convertibles)
Apparently they have 2 versions, i.e. 1 exhaust pipe on each side and even 2 exhaust pipes per side. But sadly, the web pictures aren't clear enough.

I have been searching for a good one for a while and am seriously keen on the 4 pipes.

"One thing I want to make clear is that the 2 pipes on each muffler are FULLY functionable.
This is one mightly good brand we're talking about here, therefore there are no such things like having 1 of them welded for "display purposes".
Such things may only happen to some "paliah" brands in the market...."


Driving in Singapore, I'm not really concern about BHp increments.
What I am looking for is a strong and macho bass coming out from there.

But my only concern is whether these pipes will spoil the image of the vehicle.

What I mean is will the car look too "beng"?
No offence on my statement but I'm sure you know my point.

I heard someone has already got this installed locally.
Who that lucky person is? I don't know.

Anyone has any advice for me before I pull out my wallet ??

CheeRz and Hava Nice Day ...
 
Re: ACS Exhaust System for 630i ??

Hi

Have seen the lucky car with the Hamann twin exhausts ( with M6 bodykits ) at J4C

don't look "beng" at all

lots of other mods - Great sound
 
Re: ACS Exhaust System for 630i ??

you may need to cut your bumper to fit a Quad pipes.. as the original bumper has only enough spacing for single pipes..
Eisenmann, Hamann both make Quad pipes exhaust for the 6er... Hamann is the bassiest of all!!! :D get it if you don't mind a little droning in the cabin...
And as CBS bro said, ur car wouldn't look beng la... 6er.. with quad pipes, is fierce, how to beng??
 
Re: ACS Exhaust System for 630i ??

Not too bad an idea to put on the quad pipes and M6 kit and all. To each his/her own I guess. As the saying goes, one man's trash is another man's treasure, so" beng" to one man may be "cool" to another. How you define the terms is another big can of worms that I do not desire to open.

Just don't put on the M6 badges when it's not meant to be one. I've seen a couple of 6ers doing just that and coming from a 6er owner it's a farking disgrace. Don't understand why some people spend $$ just to look like a cock. But again, that's just my opinion, and you know what they say about opinions...
 
Re: ACS Exhaust System for 630i ??

While you're at it, might as well have a look at these....

No poser is complete without this...
eBay Motors: BMW E63 M6 Genuine Carbon Fiber Roof NEW (item 170050851350 end time Dec-16-06 15:28:09 PST)

For that additional 200hp, you'll need these...
eBay Motors: BMW E63 E64 M6 6 Series Headrest Pair Black NEW (item 170050945819 end time Dec-16-06 21:30:05 PST)

Might as well throw these in just to make sure the trip to the top of the hill is nice and comfy.
eBay Motors: BMW E63 M6 Genuine Black M6 M Comfort Leather Seat Pair (item 170050014534 end time Dec-14-06 11:23:42 PST)

There you go. Complete!
 
Re: ACS Exhaust System for 630i ??

hi friend, how's your experience with 630i? I am thinking of buying one.. appreciate ur input!
 
Back
Top