New M3 rim for E90
- Thread starter Jadis
- Start date
Re: New M3 rim for E90
The question you should ask (them) is - can it fit an E90 in terms of offset? Those on E46 M3 cannot fit on any other E46s, unless you take all 4 front rims & sacrifice the rear aggressive (offset) look........
E90 could be different. Can take more aggressive offsets..........
Cannot tell now. Typically it will look 4x4.........nsbsin said:
The question you should ask (them) is - can it fit an E90 in terms of offset? Those on E46 M3 cannot fit on any other E46s, unless you take all 4 front rims & sacrifice the rear aggressive (offset) look........
E90 could be different. Can take more aggressive offsets..........
RM-TeamRims
Member
Re: New M3 rim for E90
M3 replica most shop also have
, dont have also can order for you
TripleM;268673 said:
M3 replica most shop also have
, dont have also can order for you
Jadis
Well-Known Member
Re: New M3 rim for E90
Agreed with your comments. and with the offsets whether need to roll the fenders? and have to lower the car?acupunch;269545 said:aggressive...one of my favorite made and design.
that tires might be too thin and is hard to find. commonly bros here used 235/35F & 265/30R
acupunch
Well-Known Member
Re: New M3 rim for E90
reading from your spec written, the front is 2mm outer and rear is 5mm outer compares to my set up. I think is quite safe. if you have no intention to lower the car. I don't think fender rolling is necessary. just do it one at a time. change it drive a bit, see it rub then act accordingly lo.
good choice.
reading from your spec written, the front is 2mm outer and rear is 5mm outer compares to my set up. I think is quite safe. if you have no intention to lower the car. I don't think fender rolling is necessary. just do it one at a time. change it drive a bit, see it rub then act accordingly lo.
good choice.
acupunch
Well-Known Member
Re: New M3 rim for E90
I don't think so too. actually lowering is not a must is more of a need. its been said many times in the forum. when you're on big rims, tugged look is best and served its purpose to opp for 19" upgrades. especially the BBS RS-GT is some light dish design, even on 19" will look 18" from far. that's why I choose concave wheel design, it give you the illusion of huge long wheel spoke legs = huge.nsbsin;269578 said:
Jadis
Well-Known Member
Re: New M3 rim for E90
I went down to PML this morning to find out more info of the new M3 rims, Forged, Style 220M:
Front 8.5 x 19 ET29 and Rear 9.5 x 19 ET 23
I think ET 23 is not suitable for E90, whether to take all around with 8.5 x 19 ET29??? How about the tyre's sizes? 235 front and 255 rear?? Bros here any comments? Thanks.
I went down to PML this morning to find out more info of the new M3 rims, Forged, Style 220M:
Front 8.5 x 19 ET29 and Rear 9.5 x 19 ET 23
I think ET 23 is not suitable for E90, whether to take all around with 8.5 x 19 ET29??? How about the tyre's sizes? 235 front and 255 rear?? Bros here any comments? Thanks.
