BMW performance exhaust & intake system

tskd

Well-Known Member
Hi guys,

Need your expert advice and guidance.

Could I check if adding the above does more than get a louder sound and more "bling"? Does this add more power or acceleration? Also, do I need to add both to get the results? Or does 1 produce more result than the other?

Look forward to any guidance and advice.

Cheers
 
Re: BMW performance exhaust & intake system

Calling Wt_know.......



cheers
 
Re: BMW performance exhaust & intake system

performance intake + performance exhaust = perfect match
performance factor = at most 6-8 whp ... better than nothing
bling factor = 10/10

tskd;677534 said:
Hi guys,

Need your expert advice and guidance.

Could I check if adding the above does more than get a louder sound and more "bling"? Does this add more power or acceleration? Also, do I need to add both to get the results? Or does 1 produce more result than the other?

Look forward to any guidance and advice.

Cheers
 
Re: BMW performance exhaust & intake system

Thanks, buddy.

Presumably, only performance Motor carries them, right?

By the way, any thoughts on the BMW Performance brakes and the CF strut brace?

Cheers & thanks in advance, guys
 
Re: BMW performance exhaust & intake system

I had installed the BMW Performance exhaust with PML and the sound is a bit louder and slighty better performance (5%). Was told by the guy at PML that the intake system is for the 335, same for the strut bar.
 
Re: BMW performance exhaust & intake system

PML seems very sticky - they will not install BMW parts which is imported from overseas, even if you purchased their cars and these are maintained by them.

Not sure if other bros share the same experience. Cheers
 
Re: BMW performance exhaust & intake system

i don't bother to go pml. there are plenty of reliable workshops that provide and install BMW oem & performance parts.

tskd;695162 said:
PML seems very sticky - they will not install BMW parts which is imported from overseas, even if you purchased their cars and these are maintained by them.

Not sure if other bros share the same experience. Cheers
 
Last edited by a moderator:
Re: BMW performance exhaust & intake system

tskd;695162 said:
PML seems very sticky - they will not install BMW parts which is imported from overseas, even if you purchased their cars and these are maintained by them.

Not sure if other bros share the same experience. Cheers

Due to LTA approval / cert (for e exhaust) .. they call the shot. :eek:

Legal way = PML ~~

Cheers ~~ :)
 
Re: BMW performance exhaust & intake system

Yup PML is certainly very sticky. i was requesting to swap my 18" rims from the old car to the new car and even remove it from my old ride for them. they actually find all kind of excuses not to do it even when they are preparing the new car. i was so angry that i gave them a piece of my mind....:oooops:

if you bring outside, they void warranty, you ask them to do, they say cannot... darn! paying so much for so many problems.. sigh
 
Re: BMW performance exhaust & intake system

Everything is possible after warranty, even if you tell them you wanna transplant M5 engine into 318
 
Re: BMW performance exhaust & intake system

MW;709713 said:
Everything is possible after warranty, even if you tell them you wanna transplant M5 engine into 318

hello good afternoon how are you
 
Re: BMW performance exhaust & intake system

Revive an old thread as I cant start a new discussion... Hopefully some kind soul can help me out! :oops:

I just bought a 2009 LCI 320i and got an original BMW performance muffler that was dekitted from another same model ride.
Last owner did not have any cert (my previous Honda exhaust comes with a JASMA cert), but passed me a letter from LTA stating the approval for his car with his car plate, chasis number etc...

My question is how/where do I get it installed and approved on my own car?

Many thanks to anyone that can help me out!! CHEERS!!!! :goodup:
 
Re: BMW performance exhaust & intake system

Bmw performance muffler got bmw logo embossed right...
My $0.02:
Take a risk & install w/o cert or inspection.
Chances r u will not be stopped or questioned as installation is clamped onto existing mid pipes (fr past experience)
 

Members online

No members online now.

Forum statistics

Threads
82,739
Messages
1,019,278
Members
75,236
Latest member
kernsqorg
Ad | 📈Learn Trading Strategies, Lessons and Setups
Back
Top