G30 owners please fall in!

[REND]

Mr Max from Elebest

Thanks

 

[hohlim]

Bling? Coolant low!
This is how I knew. From the agent, they didn't explain much.
They just let the engine run to bleed the air in the cooling system.

I believe there should be a check list to complete prior to delivery and WS manager has to signed off the list.
It's not like water is gushing out from any joints or holes.
But somehow, water just disappeared without a trace.
I did a visual check of the engine bay and found no trace of any leaks.
So had to drive in and let em check.
Came back same answer after 2 days so will leave it and monitor for next few months.

Another thought of mine is to drive to my usual workshop for a 2nd opinion when I have some time.
If there is found problem, then I will drive back to claim under warranty.
Anyway, it came with 5 years warranty.
So not really a concern till its 4 years later.

Understand....I suppose u are refering to the PDI which is carried out by ADs. Sadly, PDI is non existent for us PI and is carried out by the actual buyers.i found a scratch on my rim 1 week after collection but cannot do anything about it too. its not done by me cause i have some photos of the wheel prior to vehicle collection but no point arguing already.

 

[The Guardian]

Understand....I suppose u are refering to the PDI which is carried out by ADs. Sadly, PDI is non existent for us PI and is carried out by the actual buyers.i found a scratch on my rim 1 week after collection but cannot do anything about it too. its not done by me cause i have some photos of the wheel prior to vehicle collection but no point arguing already.

Look forward to a new set of 20s...

 

[hohlim]

Look forward to a new set of 20s...

Yup...got sucked in by Mark1919 and Silly5 and went to AC Gruppen. He made me a good offer. Rotiform DUS Single pc forged in brushed sliver finish

8.5 front with ET of 27 and
9.5 rear with ET of 28.

Have not heard of the brand before but since its single piece and forged decided to give it a go. Did not go for 10 or 10.5J for the rear coz wanted max concavity and do not see myself going more than 285 for the rear. Hope it turns out well. The wheel reminds me of OZ supertourismo....

 

[mark 1919]

Yup...got sucked in by Mark1919 and Silly5 and went to AC Gruppen. He made me a good offer. Rotiform DUS Single pc forged in brushed sliver finish

8.5 front with ET of 27 and
9.5 rear with ET of 28.

Have not heard of the brand before but since its single piece and forged decided to give it a go. Did not go for 10 or 10.5J for the rear coz wanted max concavity and do not see myself going more than 285 for the rear. Hope it turns out well. The wheel reminds me of OZ supertourismo....

Welcome to our silly group.hehe!

Sent from my SM-N950F using Tapatalk

 

[Silly 5]

Yup...got sucked in by Mark1919 and Silly5 and went to AC Gruppen. He made me a good offer. Rotiform DUS Single pc forged in brushed sliver finish

8.5 front with ET of 27 and
9.5 rear with ET of 28.

Have not heard of the brand before but since its single piece and forged decided to give it a go. Did not go for 10 or 10.5J for the rear coz wanted max concavity and do not see myself going more than 285 for the rear. Hope it turns out well. The wheel reminds me of OZ supertourismo....

Hahaha...you itching to do already lah...and we just put tiny little bit of poison and you jump right in... welcome to the silly club!


Sent from my iPhone using Tapatalk

 

[mark 1919]

Hahaha...you itching to do already lah...and we just put tiny little bit of poison [emoji879]️ and you jump right in... welcome to the silly club!


Sent from my iPhone using Tapatalk

3 of us bought from AC. But all from different brands.

Sent from my SM-N950F using Tapatalk

 

[hohlim]

3 of us bought from AC. But all from different brands.

Sent from my SM-N950F using Tapatalk

Yes,in case any of u are wondering...its really roti(bread)form

 

[mark 1919]

Yes,in case any of u are wondering...its really roti(bread)form

Yours and mine is a 1 piece type . So its lighter as compared to a 3 piece type. I have tried carrying it.

Sent from my SM-N950F using Tapatalk

 

[Silly 5]

I actually didn’t think too much about the weight, I just liked the design and deep dish feels[emoji16] we should have group on and pressure Jun


Sent from my iPad using Tapatalk

 

[mark 1919]

I actually didn’t think too much about the weight, I just liked the design and deep dish feels[emoji16] we should have group on and pressure Jun


Sent from my iPad using Tapatalk

With the car hp. Shouldn't be a problem.

Sent from my SM-N950F using Tapatalk

 

[mark 1919]

I actually didn’t think too much about the weight, I just liked the design and deep dish feels[emoji16] we should have group on and pressure Jun


Sent from my iPad using Tapatalk

Totally agreed. Most important you like. Thats all that matters.

Sent from my SM-N950F using Tapatalk

 

[The Guardian]

Yup...got sucked in by Mark1919 and Silly5 and went to AC Gruppen. He made me a good offer. Rotiform DUS Single pc forged in brushed sliver finish

8.5 front with ET of 27 and
9.5 rear with ET of 28.

Have not heard of the brand before but since its single piece and forged decided to give it a go. Did not go for 10 or 10.5J for the rear coz wanted max concavity and do not see myself going more than 285 for the rear. Hope it turns out well. The wheel reminds me of OZ supertourismo....

Those multi spokes..... think of washing, sian half...
Just like my current set, wash till hand pain.

 

[REND]

My car was filled with lots of scratches, water marks and even the engine bay was grey in colour. True that PI do not carry out PDI.

Those multi spokes..... think of washing, sian half...
Just like my current set, wash till hand pain.

Get those ph-balanced rim cleaner, spray and leave it for a min then use water rinse off. It's easy

 

[hohlim]

Those multi spokes..... think of washing, sian half...
Just like my current set, wash till hand pain.

Im currently using 664M wheels and i have my fair share of spokes to clean to but what i find useful is a feather duster. Maybe can give it a try

 

[hohlim]

My car was filled with lots of scratches, water marks and even the engine bay was grey in colour. True that PI do not carry out PDI.

Heng heng u have people to do a thorough clean up of the car!

 

[REND]

Heng heng u have people to do a thorough clean up of the car!

haha i cleaned both my cars most of the time except when i am totally drained. lol as don't want people to say i abuse manpower.

 

[mark 1919]

haha i cleaned both my cars most of the time except when i am totally drained. lol as don't want people to say i abuse manpower.

I got no choice , clean myself. No helper to clean. With my new rims design its much easier to clean compare to my F10.

Sent from my SM-N950F using Tapatalk

 

[REND]

I got no choice , clean myself. No helper to clean. With my new rims design its much easier to clean compare to my F10.

Sent from my SM-N950F using Tapatalk

Take it as a weekly exercise routine
The lesser the spokes the better else will have a hard time cleaning.

 

[TezzaRed]

Those multi spokes..... think of washing, sian half...
Just like my current set, wash till hand pain.

Totally agree.. that's why my current rim only 5 spokes... LOL