hello and need advice on F10

[yiewvn]

Re: hello and need advice on F10

PI OMV should be slightly lower abit (but not really a lot)...................anyway already spend so much so just pay abit more for a piece of mind.................(just my opinion) and also when you are upgrading your ride next round it is also easier to sell ....................buy low sell low buy high sell high (i think)

i oso agree with this, but my problem is that the PML 535 is coming in at such high-spec/$$ with lots of options (that some here oso think not necessary) that you can't de-select i.e. no low-line option

 

[Slater]

Re: hello and need advice on F10

Agree that it makes sense to go 535 (or not at all) if they priced 528 at 250+. I'm hoping (perhaps foolishly) that the 528 will come in around the 220-230 region since 523 is at 180+. Got chance or not?

unlikely. the 188k 523 is the base model. they have a 523 highline which is at 208 to 210k. and no1 knows if they will ever bring in the 528.

 

[etan1]

Re: hello and need advice on F10

actually, I think there is a chance...

if high line and basic 523 has a $ 20k difference at $208-210k, then 528 may be positioned at around $230-240k.

 

[davidtch]

Re: hello and need advice on F10

Don't think 528 will make it to our shore. Juz look at Z4. Only S23 & S35.

 

[Slater]

Re: hello and need advice on F10

Don't think 528 will make it to our shore. Juz look at Z4. Only S23 & S35.

it all boils down to difficulty in "positioning"

 

[davidtch]

Re: hello and need advice on F10

That's what i m trying to tell etan1.

 

[etan1]

Re: hello and need advice on F10

That's what i m trying to tell etan1.

it all boils down to difficulty in "positioning"

understand... it's difficult....

 

[yiewvn]

Re: hello and need advice on F10

Don't think 528 will make it to our shore. Juz look at Z4. Only S23 & S35.

Actually I received an official email from PML before saying that they will bring in the 528....but perhaps they've now changed their minds because of 'positioning'

 

[yiewvn]

Re: hello and need advice on F10

By the way, does anyone have the technical specs (BHP, Torque, performance times) for the 523? Understand that it's a 2.5L rather than the 3L that I find in the UK websites. Thanks!