Hi Guys, just curious how do you all run in your M car?

Hi Bro Ryan, I mean break in the engine. Pardon my English. Haha, Saw from online there is different method. So just curious how you do guys break in your M engine. (;
 
Just take it easy first few kms by changing gears earlier if via sports/manual mode or use D2-D3 via drivelogic. After running in then start engaging "M botton" on steering wheel more often with D5 or S5 setting :)
 
Lucas92;n1845814 said:
Hi Bro Ryan, I mean break in the engine. Pardon my English. Haha, Saw from online there is different method. So just curious how you do guys break in your M engine. (;


haha thought it was some F&F reference.
 
Follow the run in instructions Lo.: the V8 had it.. Maybe inline 6 don't have..

Factory instructions won't go wrong
 
Vary the rpm. I just had to run in a replacement engine in my F10 M5 as the previous engine died after consuming 1 litre of oil every 800km. This time the run in was don't thrash the engine but don't drive it at Low rpm. Instead vary the rpm range throughout but don't use engine braking. After the first 5000km I was good to push it harder. Consumes oil beautifully now only every 5000km which is brilliant on an F10 M5.
 
For the Inline 6. For the first 2000km keep rpm below 5500. And dun go above 170km/h. To the 5000km mark. Can gradually up the speed to 220km/h
 

Members online

Forum statistics

Threads
82,743
Messages
1,019,293
Members
76,244
Latest member
pysoyorg
Back
Top