Interior Trim
- Thread starter ttoh
- Start date
Red_Bean_Bun
Well-Known Member
Re: Interior Trim
Would vote for SWC to do this......
T6;885092 said:
Would vote for SWC to do this......
Re: Interior Trim
One hour NOT enough. For E60, the whole panel has to be taken out and then there are multiple screws inside to unscrew before the trims can be take out. The two front doors are tricky because for the dashboard trims to be taken out, the two aircon ducts at the side MUST also be dismantled.
Whole process give and take will require about 2 hours MINIMUM continous work (no smoke breaks, no toilet breaks, no phone calls, no chit chat etc )...
I did mine at Robson
One hour NOT enough. For E60, the whole panel has to be taken out and then there are multiple screws inside to unscrew before the trims can be take out. The two front doors are tricky because for the dashboard trims to be taken out, the two aircon ducts at the side MUST also be dismantled.
Whole process give and take will require about 2 hours MINIMUM continous work (no smoke breaks, no toilet breaks, no phone calls, no chit chat etc )...
I did mine at Robson
Divespyder
Well-Known Member
Re: Interior Trim
I did mine at Robson.. took 3 hours. Agonising wait.
I did mine at Robson.. took 3 hours. Agonising wait.
ttoh
Well-Known Member
Re: Interior Trim
Thanks for the insights guys, guess it's not a straightforward process, will contact Robson with measured expectation then !
Btw, just want to say that after going through 1 and 3 series, I must say the e60 hold it's own as one of Bangle's most exciting design. Was my first love of the talented designer's work a long time ago, and still look fresh in my eyes after 8 years. Just have to fix some occasional rattles in my 8 year old car !
Thanks for the insights guys, guess it's not a straightforward process, will contact Robson with measured expectation then !
Btw, just want to say that after going through 1 and 3 series, I must say the e60 hold it's own as one of Bangle's most exciting design. Was my first love of the talented designer's work a long time ago, and still look fresh in my eyes after 8 years. Just have to fix some occasional rattles in my 8 year old car !
wobbles
Well-Known Member
Re: Interior Trim
Dun worry bro, you're back in the big league, big time, big swinging dick now. Many bros for you
Knock on wood, if lady luck pull one of her infamous pranks on you again, you'll still have your bros here for you. /wobbles stands up to be counted - not just Internet heroism ok
MW;885242 said:
Dun worry bro, you're back in the big league, big time, big swinging dick now. Many bros for you
Knock on wood, if lady luck pull one of her infamous pranks on you again, you'll still have your bros here for you. /wobbles stands up to be counted - not just Internet heroism ok
ttoh
Well-Known Member
Re: Interior Trim
It's funny how superficial some 'friends' are isn't it ? Materialism in Singapore has somehow clouded some folks who are really harmless in intent. True friends are more motivated to be sensitively crytstal.
Anyways, kudos to you for the effort paid to your cars, both e60 and F10 !
MW;885242 said:
It's funny how superficial some 'friends' are isn't it ? Materialism in Singapore has somehow clouded some folks who are really harmless in intent. True friends are more motivated to be sensitively crytstal.
Anyways, kudos to you for the effort paid to your cars, both e60 and F10 !
Dymenxion7
Well-Known Member
Re: Interior Trim
Bro, did you managed to get it done in the end? i am trying to find someone who can help to replace my current door handle panel/trim. Apparently, my last owner managed to break every single hooks inside, and used those sticky glue to hold it to the door. i wish to replace it as it seemed quite difficult to do it myself. Some more, the replacement trim costs my $80/pc...just a piece of plastic...
ttoh;884798 said:
Bro, did you managed to get it done in the end? i am trying to find someone who can help to replace my current door handle panel/trim. Apparently, my last owner managed to break every single hooks inside, and used those sticky glue to hold it to the door. i wish to replace it as it seemed quite difficult to do it myself. Some more, the replacement trim costs my $80/pc...just a piece of plastic...
