Vibration issue

[jasonmaxima]

Re: Vibration issue

1M got fault...bring back to MA for them to diagnose / fix.... anyways they have the 5 years warranty thingy to cover the car.

besides, the car is stock....

maybe navi can ask for courtesy car... then jio meek for ///M5 test drive.....

 

[chesterchong]

Re: Vibration issue

I didn't do anything to the car. It's stock.

then most probably it is due to coils or spark plugs

 

[Navi]

Re: Vibration issue

then most probably it is due to coils or spark plugs

I just hope they will find out what is causing this problem and solve it.....I miss my car =( I will ask what went wrong and update you guys again =)

 

[M135M]

Re: Vibration issue

all the best and update us!

 

[Navi]

Re: Vibration issue

update: problem found one of the valve on the 6th cylinder is jammed.... got to wait for parts to be ordered and delivered before repair can be done. time given was 1 to 2 weeks.......

 

[Red_Bean_Bun]

Re: Vibration issue

Since going to reach in there to address valve issues - maybe can ask them to clean up the carbon there along the way .......

update: problem found one of the valve on the 6th cylinder is jammed.... got to wait for parts to be ordered and delivered before repair can be done. time given was 1 to 2 weeks.......

 

[Navi]

Re: Vibration issue

Since going to reach in there to address valve issues - maybe can ask them to clean up the carbon there along the way .......

They won't auto clear de? XD initiative mah lol.

 

[Red_Bean_Bun]

Re: Vibration issue

Bring a toothbrush there and pass it to them to use .......

They won't auto clear de? XD initiative mah lol.

 

[zhelinm]

Re: Vibration issue

Curious to know if you mean the valve in the cylinder head or other valves? How stuck is stuck? Did they do a leak down to determine the fault? I am curious to know because I had an experience in the past with a stuck valve that is only about 1-2mm stuck and the result is a bent valve. That was on a motorcycle engine. That is how tight the clearance is from the valve to the piston crown. Interested to know how they know its a stuck valve.

 

[Navi]

Re: Vibration issue

Curious to know if you mean the valve in the cylinder head or other valves? How stuck is stuck? Did they do a leak down to determine the fault? I am curious to know because I had an experience in the past with a stuck valve that is only about 1-2mm stuck and the result is a bent valve. That was on a motorcycle engine. That is how tight the clearance is from the valve to the piston crown. Interested to know how they know its a stuck valve.

No idea man I just repeated what I was told lol. Don't really care liao they fix swee swee can le. XD

 

[Red_Bean_Bun]

Re: Vibration issue

After they clean it ..... Install an Oil Catch Can .....

Along the way ask them to check the solenoid valve for good measure.