8psi pulley size for ASA SK1

[danielO]

Hi,
Need to check, what is the correct size for boosting 8psi on a ASA SK1 for a E46 '01 325. thanks

 

[adliz]

Re: 8psi pulley size for ASA SK1

145mm for m54 2.5L.. depends on the engine.. urs is m52?

 

[danielO]

Re: 8psi pulley size for ASA SK1

M52/54 er.... i do not know la.

But i have just found out that my slightly small than 130mm is the correct size for my Infinitas-ASA SC kit.
Tecknic SC kits use the 140mm for stage 2.

Do not know the reasoning, but maybe infinitas's SC design is less efficient?

 

[eddie]

Re: 8psi pulley size for ASA SK1

M52/54 er.... i do not know la.

But i have just found out that my slightly small than 130mm is the correct size for my Infinitas-ASA SC kit.
Tecknic SC kits use the 140mm for stage 2.

Do not know the reasoning, but maybe infinitas's SC design is less efficient?

daniel,

yours is m54....

 

[adliz]

Re: 8psi pulley size for ASA SK1

err.. but doesnt make sense.. both using the same blower.. infinitas uses smaller intercooler than technik.. so technik kit with bigger i/c shud be using smaller puller to produce the same boost ?

 

[danielO]

Re: 8psi pulley size for ASA SK1

I also don't know.

If you get buy a Tecknic Stage 2 SC kit, it will come with a 140mm pulley.

If you buy a Infinitas Stage 2 SC kit, you will get a 128mm pulley.

Maybe the plumbing, I/C etc makes for the difference?

:screwedu:

 

[eddie]

Re: 8psi pulley size for ASA SK1

I also don't know.

If you get buy a Tecknic Stage 2 SC kit, it will come with a 140mm pulley.

If you buy a Infinitas Stage 2 SC kit, you will get a 128mm pulley.

Maybe the plumbing, I/C etc makes for the difference?

:screwedu:

daniel,

if u surf e46fanatic.... ask a guy called samir (he goes under the nick called tecknic)

grand master sifu with matters on tecknic SC.........

cheers,

eddie

p/s: Sorry me N/A dude.........