Re: GPS placement
I like mine. It was done exactly as what i wanted. No scratch marks and dents bcos no need to remove dash board or use rough tools. They only slightly moved three parts: Driver side air bag strip (not removing airbag), driver side electrical circuit board cover and passenger side glove compartment. All these just to connect wiring. I recommend you going to a reputable ICE shop bcos the wiring is best to be neat and tidy. They will use cable tie etc to prevent excess wires from getting loose.
Go get it done. You will like it. Speak to sponsors here, i am sure they can do it.
Peterpan;649880 said:Which one is good? I don't like seeing them tearing your dash board apart with rough tools leaving scratches and dent marks after the job.
Thanks .
I like mine. It was done exactly as what i wanted. No scratch marks and dents bcos no need to remove dash board or use rough tools. They only slightly moved three parts: Driver side air bag strip (not removing airbag), driver side electrical circuit board cover and passenger side glove compartment. All these just to connect wiring. I recommend you going to a reputable ICE shop bcos the wiring is best to be neat and tidy. They will use cable tie etc to prevent excess wires from getting loose.
Go get it done. You will like it. Speak to sponsors here, i am sure they can do it.