WTB: stock E90 325 or 330 brake assembly
- Thread starter astrosky
- Start date
Re: WTB: stock E90 325 or 330 brake assembly
Hi Astrosky,
You may wish to check with Piggyboyz on whether he's keen to let go of his which are very new (325i, 300mm Front + 300mm Rear). I also have a set which is about 20months old, but I recommend you check his out first.
Should be direct fit for all models below the 335i.
For 335i brakes to fit on non-335i models, the rears require the fabrication of a bracket (~$500) to be fitted on the rotors to allow the parking brake to function - otherwise, I think you will lose the function of the parking/hand brake.
Hi Astrosky,
You may wish to check with Piggyboyz on whether he's keen to let go of his which are very new (325i, 300mm Front + 300mm Rear). I also have a set which is about 20months old, but I recommend you check his out first.
Should be direct fit for all models below the 335i.
For 335i brakes to fit on non-335i models, the rears require the fabrication of a bracket (~$500) to be fitted on the rotors to allow the parking brake to function - otherwise, I think you will lose the function of the parking/hand brake.
Re: WTB: stock E90 325 or 330 brake assembly
We checked out the costs involved in getting the brakes to fit the rotors, turns out the entire rear shaft has to be replaced (or something along that line). Total cost for parts alone was about $3K unless the car already comes with Payload Increase. :yikess: We gave up.R2D;362066 said:
He didn't, but he does have the set taken off his car when it was just a few months old.astrosky;362073 said:
