Re: Eyeing On Tis Car 318is Coupe
Quite some critique on the M42 plant...give my version. The 16V unit is a highly dependable workhorse that provides power on the tap. With careful mtce, the engine can be a real gem. Mines going very strong at 290k, no oil consumption. Compared to the M40 8v unit, the 16v has forged internals...fully counterweighted forged crankshaft and con rod, plus oil jets shooting at the piston skirts for lubrication and cooling!! All these for effortless 200kmh on the highway...as with all high performance engines; you need to watch out for negligence and abuse. Run the radiator dry and you lose the cyl head for certain. Check for oil leaks at the gaskets, sure signs of blow-by that the engine is tired. Listen for any rattling, chain and tensioner may be going or may be a lazy tappet....good luck and have fun!
Quite some critique on the M42 plant...give my version. The 16V unit is a highly dependable workhorse that provides power on the tap. With careful mtce, the engine can be a real gem. Mines going very strong at 290k, no oil consumption. Compared to the M40 8v unit, the 16v has forged internals...fully counterweighted forged crankshaft and con rod, plus oil jets shooting at the piston skirts for lubrication and cooling!! All these for effortless 200kmh on the highway...as with all high performance engines; you need to watch out for negligence and abuse. Run the radiator dry and you lose the cyl head for certain. Check for oil leaks at the gaskets, sure signs of blow-by that the engine is tired. Listen for any rattling, chain and tensioner may be going or may be a lazy tappet....good luck and have fun!
russo;199442 said:Whats the mileage on the car? Most of the IS engines are very unstable during idle. Partly due to the fact of its high cams. Which is very normal. Bear in mind that the 4th cylinder will always give trouble coz its the hottest at the back. Thats where the coolent will leak out. Not to mention the A/C, wheel bearings, fuel pumps, beltings, brakes, roof lining, power steering hoses... Damn come to think of it,you better get an experienced technician to check it out before you buy that. This model has the higest wear and tear rate.